Steam room exhaust fan

• For extracting humid air after steam bath use
• Pipe connections DN 100
• Volume flow from 145 to 187 m³/h
• Power consumption: 33 W
• Maximum ambient temperature: 60 °C
• An additional E-plug is required for the electrical connection to the TOLO steam generator

Exhaust fan for steam bath – extract humid air after use

The exhaust fan with DN 100 pipe connections supports the ventilation of your steam bath cabin after use. It is switched on after the steam bath to transport the humid air outside via a suitable exhaust air line.

Extracting the humid room air supports the drying of the cabin. For planning purposes, a volume flow of 145 to 187 m³/h and a power consumption of 33 W are available.

Your benefits at a glance

• Exhaust after the steam bath: Removes humid air from the cabin after use.
• DN 100 connections: For integration into a suitable exhaust air line.
• Connection to the TOLO steam generator: The electrical connection can be established with the separately available E-plug.

Technical data

• Connection voltage: 220–240 V / 50 Hz
• Power consumption: 33 W
• Maximum ambient temperature: 60 °C (T60)
• Pipe connections: DN 100
• Speed: 2,180–2,385 rpm
• Volume flow: 145–187 m³/h

Planning and installation

Plan for a suitable exhaust air line with DN 100 as well as sufficient supply air capacity for the cabin. The actual exhaust performance achieved depends on the length and route of the line, among other factors.

When choosing the installation location, note the maximum ambient temperature of 60 °C. This temperature limit must be taken into account, especially when used in connection with a sauna.

Connection to the TOLO steam generator

For the electrical connection of the fan to the TOLO steam generator, you additionally require the appropriate E-plug. This is available separately.

View E-plug for connection to the TOLO steam generator