All about this item
- Flexible stainless steel steam line for TOLO 9.0 and 12.0 kW
- Manually bendable for easy adjustment to the installation route
- Already heat-insulated – reduces heat loss
- With two ¾″ union nuts
- Available in various lengths
- Intended for surface mounting
Insulated steam line ¾″ – flexible connection for your TOLO steam generator
Connect your TOLO steam generator with 9.0 or 12.0 kW to the wall feed-through of your steam room. The flexible stainless steel line is already equipped with thermal insulation and can be adjusted by hand to the intended installation route.
The flexible design simplifies installation in various installation situations. The existing insulation reduces heat loss on the way from the steam generator to the cabin.
Your benefits at a glance
- Flexibly installable: The stainless steel line can be bent by hand and adjusted to the installation situation.
- Already insulated: The thermal insulation is an integral part of the line and does not need to be attached separately.
- Suitable connections: Two ¾″ union nuts serve for connection to the steam generator and the appropriate wall feed-through.
- Length as required: Choose the line length suitable for the planned distance between the generator and the cabin.
Technical specifications
- Material of the line: Stainless steel
- Design: flexible, manually bendable
- Insulation: factory-fitted thermal insulation
- Connections: 2 × ¾″ union nut
- Compatibility: TOLO 9.0 and 12.0 kW
- Length: depending on the chosen variant
- Installation: surface-mounted
Planning and installation
The steam line is installed between the steam generator and the appropriate wall feed-through. It is intended for surface mounting. Plan for the shortest, most direct route possible and observe the installation instructions for your TOLO steam generator.
When bending, avoid kinks and areas where condensation can collect. Observe the specifications for the gradient and the maximum line length in the installation manual.
Connecting multiple lines
Multiple steam lines can be connected with a suitable ¾″ stainless steel double nipple. This must be procured separately and is not included in the scope of delivery. Even when extending, the permissible total line length and the installation specifications of the steam generator must be adhered to.
Scope of delivery
- 1 insulated stainless steel steam line in the selected length
- 2 pre-assembled ¾″ union nuts
- 2 sealing rings
Produktsicherheit und Hersteller
Hazard statements
Risk of scalding
Do not touch the steam pipe during operation. Install the pipe out of the reach of children. The pipe can briefly reach temperatures of up to 105 °C, which can cause severe burns.
Distance to combustible materials
Maintain a safety distance of at least 3 cm between the steam pipe and combustible materials such as wood.
Minimizing bends
Reduce the number of bends in the pipe to minimize the noise of the incoming steam in the steam room. Keep bend radii as large as possible to optimize flow.
Condensation
Condensation can collect in the steam pipe, which can be ejected during sudden release and cause injury. Route the pipe in such a way that no water remains in it.
Material wear and corrosion
Regularly check the pipes, especially connection sleeves and seals, for material fatigue, corrosion, or other damage. Defective pipes can release hot steam and cause injury.
Item description: Steam pipe 3/4"
Manufacturer: Shenzhen TOLO Leisure Equipment Co.,Limited
Yonghe Road 4, Shenzhen City, China Email: info@tolosauna.com
Importer: KAISER Wellness GmbH, Lichtenhag 17, A-4201 Gramastetten, Email: office@kaiser-wellness.at